Changing the mount on your Dash Cam
This article walks you through the process of removing the Dash Cam from the powered mount, taking the adhesive mounting plate off and how to change over to the suction cup mount.
Pull the Dash Cam away from the windscreen by pulling it towards you.
Slide the adhesive plate across (away from the small notch) to remove it from the powered mount, once removed, slide the replacement suction cup onto the mount in the oposite direction.
When applying the suction cup mount to the windscreen (with Dash Cam attached), ensure the suction cup and windscreen surfaces are both clean. Apply pressure with the lever-arm open, then push the arm down until the mount locks into position.
Please sign in to leave a comment.